HIGH SOLID, DEEP PENETRATING WAXED IMPREGNATING AGENT
3320XX-HD
Holzwachs Lasur HD50 is a natural oil, wax and resin based non-peeling finish for interior/exterior cladding. Self-sealing, it provides both color and strong protection. Thanks to its deep penetration in the wood fibers, and high solid content, applied in two or three coats, it grants a long term durability. Suitable also for metallic/glitter special effects. Weather and UV resistant, it avoids cracking or shrinkage and protects the wood from molds. Extremely easy application thanks to its high viscosity and excellent brushability; easy refurbishing (no sanding needed). Indoor and outdoor use. The use of Holzwachs Lasur HD50 is recommended on dry wood, clean from old stains, lacquers or varnishes.
Cod. 3320XX-HD - 750 ml 06pz.
Cod. 3322XX-HD - 2,5 Lt 02pz.
Cod 3330XX-HD - 5 Lt 02 pz.
Cod. 3344XX-HD - 10 Lt
Cod. 3340XX-HD - 20 Lt
LOGIN
Stir well before use, ready to use. Before any application remove any residual of old paints, by sanding or with lacquer removers of Borma range (code: 0031ES and following).
Apply a first coat of pigmented product by brush or by cloth, and let dry for about 10-12hrs, in ventilated conditions. No sanding is needed before the application of the second coat.
To protect the color and increase durability of the treatment, apply a second/third coat by brush.
In case of maintenance, no sanding is needed as well, just remove dirt and dust before the application of a new coat.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.