OIL-WAX BASED - INTERIOR AND EXTERIOR - TRANSLUCENT WOOD-TONE FINISH
3320XX-3X1
Holzwachs Lasur is a satin, wax finish, for interiors and exteriors, with a natural oil, wax and resin base. It can be diluted with products from the Solvoil range, penetrating the wood to create a decorative, protective and highly elastic layer on the surface. Water repellent and breathable, it does not flake. It contains UV filters and additives for wood protection. Application of two or three coats is recommended. To renew the coating, simply apply a coat on the dry and clean surface. There is no need to sand. Holzwachs Lasur creates a natural, satin effect. For a more decorative effect and greater protection, one or two coats of Decking Oil -Danish Oil can be applied on it.
Code 3320XX-3X1 - 6 x 750ml
Code 3322XX-3X1 - 2 x 2,5Lt
Code 3330XX-3X1 - 2 x 5Lt
Code 3344XX-3X1 - 1 x 10Lt
Code 3340XX-3X1 - 1 x 20Lt
show more
The images, photos and colours are purely indicative
LOGIN
With a brush or soft piece of woollen cloth, apply directly onto the surface to be treated. If it is coloured, test before applying.
Let it act for a minimum of 8 hours.
If needed, sand over before applying a second coat.
For a more perfect finish, after applying with the brush we advise rubbing over with a cloth. Total drying time 24 hours.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.
HACCP
Compliance with HACCP, an acronym for Hazard Analysis and Critical Control Points, means adhering to a food safety management system that aims to identify, evaluate and control hazards that can compromise the wholesomeness of food. In practice, it involves adopting preventive measures to ensure that food is safe for consumption.