Extra fine two components filler with optimal sandability for metal surfaces. Maximum consistency, apply with a brush in order to obtain a pore-free base with optimal flexibility and the guarantee of optimal adhesion on all imperfections. For Indoor and outdoor use. Usage ratio of the hardener: K2 Metal - 100 gr./Catalyst 2.5 gr.
Code 1620 - 12 x 125ml
Code 1630 - 6 x 750ml
K2 two-components metal filler should be applied to grease-free clean surfaces for best results.
Withdraw the necessary amount of K2, add the hardener.
The filler paste will start to harden after about 15-40 minutes at 20°C (depending upon weather conditions).
Sand with P80, P120 or P220 grain paper.