1500XX
Odourless, light-stable and ecological water-based putty for wood.
The white version is also suitable for smoothing plaster.
Formulated to minimise shrinkage on drying and to allow colours to be inter-mixable with each other to create limitless shades.
Available Colours: 01 POPLAR / 04 Fir / 05 Pine / 08 Natural Wood / 10 Larch / 17 Teak/ 30 Cherry / 42 Beech / 48 MEDIUM OAK / 50 White / 51 Oak / 53 Light Walnut / 54 Douglas / 58 Rosewood / 59 Medium Walnut / 62 Mahogany / 63 Dark Walnut / 65 Ash / 146 Wenge
| Cod. EN1500XX | 250 gr. | 12 pcs. |
| Cod. 1510XX.200 | 200 gr. tube | 12 pcs. |
| Cod. 1510ESP.XXX | 250 gr. Tubes display | 6 colours 36 pcs. |
| Cod. EN1520XX | 500 gr. | 12 pcs. |
| Cod. EN1550XX | 1 Kg. | 12 pcs. |
| Cod. EN1570XX | 5 Kg. | 04 pcs. |
LOGIN
Choose the required shade (preferably darker than the surface to be treated) and apply the filler directly onto the cleaned fault.
Leave to dry for 6/8 hours, depending on the thickness of the coat.
Sand off any excess.
Remove any dust or grease and paint the surface with either solvent based products and water based (Holzfarbe, Water-based pastel stains, Spirit stains).
Once dry it can be overpainted (Holzwachs spray) or treated with wax (Beeswax in paste form).
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.