MELTING HARD STICK
1200XX
Melting wax stick of considerable hardness when set. Special for refurbishing, synthetic and modern surfaces, 95°C melting point. 90 colours available light resistant. For indoor and outdoor use. Colour-match service available. It has many characteristics that make it an ideal product such as good adhesion which makes it easier to apply, good plasticity and a noticeably hardness on touch. The product is compatible with any subsequent treatment.
| Cod. | Desc. | Pack. |
| 1200XX | 20 gr. Various colors | 10 pcs. |
| 1200 | Sample color | 10 pcs. |
| 1200CH | 20 gr. Assorted Light Colours | 10 pcs. |
| 1200SC | 20 gr. Assorted Dark Colours | 10 pcs. |
| 1200AS | 20 gr. Assorted Plain Colours | 10 pcs. |
Assorted light colours: 50 white, 65 ash, 05 pine, 40 maple, 42 beech, 06 birch,
10 larch, 54 douglas, 02 light natural oak, 51 light oak.
Assorted dark colours: 66 dark cherry wood, 16 cherry-pearwood, 30 cherry, 62
mahogany, 33 dark mahogany, 58 palisander, 48 medium oak, 52 dark oak, 53 light
walnut, 59 medium walnut, 63 dark walnut.
Assorted plain colours: 50 white, 119 lemon yellow, 120 yellow, 122 orange, 125
red, 126 pink, 127 purple, 130 green, 136 pine green, 137 dark green.
Colour-Match Service Available
show more
LOGIN
Using a sharp knife remove any splinters or damaged wood from the area to be repaired in order to form a sound base for the application of the wax.
Pre-stain the damaged area using a suitable shade of Touch-up dye pen, Colour edging pen, Touch-up dye or Colour touch-up and fill with the wax. Using the Gas heating iron, melt the wax into the damage until it is full. Then apply the other waxes in various coats and shades until the colour is achieved.
Wait until the wax is cold then remove any excess using a spatula or an abrasive pad.
In order to get the best shade touch up with the Touch-up dye pen, Graining pen, Colour edging pen, Touch-up dye or Colour touch-up. Fix with a fine coat of Holzspray spray varnish.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.