Turapori gel is a fast drying single component product. Transparent and of high adhesion. The product is ideal as a first coat of varnish or as a base for wax treatments. It's in a gel form and ready to use. It's easy to apply on vertical surfaces, avoiding the drip and making it possible fast drying , it gives great results even if diluted over the advisable amount.
Code 0650 - 12 x 250ml
Code 0652 - 6 x 750ml
Code 0655 - 2 x 5Lt
The wood must not be varnished; it must be sanded, free of dust, grease and wax. Check that any stains (Multipurpose concentrated dye, Spirit stains) are completely dry. The product must be applied at a temperature no lower than 10°C. If required, dilute with 10-20% of nitro thinner.
Evenly apply the product using a brush. We advise a preliminary test if a spray is used.
When dry after 2-3 hours, sand lightly (240-360 grain) and apply a second coat.
When the support is dry finish with Shellac french polish or Beeswax in paste form.