It allows intensive cleaning of wood, removing the stubborn dirt and previous treatments with an oil or alkyd base. It is also particularly useful to degrease exotic wood particularly rich in oils and extracts. In this case, you are recommended to dilute the product with water 1:1. Wet the support with plenty of water before treatment.
Due to the high concentration of organic substances, Extra Strong Wood Cleaner can change the natural colour of the wood, making it darker. To restore the original colour of the wood, subsequently use Exterior Wood Cleaner.
|Code 0091||12 x 1Lt|
|Code 0092||2 x 5Lt|
|Code 0093||1 x 10Lt|
|Code 0094||1 x 25Lt|
Shake well before use.
Wet uniformly with water the surface to be treated, just to slow down the drying of Extra Strong Wood Cleaner. Apply uniformly by brush (from top to bottom, on vertical supports) and leave it work for 15-30min. If necessary, apply again to keep the support wet.
With a thick synthetic brush remove the dirt. If possible use a high pressure water pump to help the removal.
Wait for 24-48hrs the complete drying before proceeding with the new treatment with Borma oils.