code
PRODUCTS
Home / TOUCH UP & FILLERS - Filling
WOOD DUST FILLER
SDS code: 0056
LOGIN
Description
Special dust filler with wood powder, specific for wooden surface but suitable also for walls. It is the ideal solution for filling of wood defects and for reconstruction of missing parts. It adheres perfectly on each kind of surface. Colors are resistant to sunlight. Suitable for over-lacquering with PU, acrylic, epoxy, UV and waterborne lacquers.
Packaging
Method of Usage
| Cod. | Descr. Pack. |
| 0056XX | 12,5 Kg. Various Colors |
| 0056XX.1 | 1 Kg. Various Colors 06 pcs. |
In a clean container, mix Dust Filler with water, in ratio filler: water 3:1. The amount of water can change depending on the desired viscosity.
Apply the prepared filler on a clean and degreased surface, on the defect. Where possible apply an abundant layer in order to prevent natural loss of volume of the filler during drying.
Wait 4-6 hours for complete drying of the filler then proceed to a further application, if necessary, or to staining/lacquering.
It is possible to color Dust Filler with the Waterborne Pigments of the COW series or with universal stain Holzfarbe.
